Coils, slit strip and cold rolled strip
These are customised belts that are not only made to measure, but also to specific technical and mechanical properties. Furthermore, edge and surface finishes can be specified. After rolling, most of these strips are wound into coils. These strips are mainly used in punching machines.
Cold-rolled steel strip according to EN 10139 / 10140
DC01 (Wst.-Nr. 1.0330)
DC03 (Wst.-Nr. 1.0347)
DC04 (Wst.-Nr. 1.0338)
DC05 (Wst.-Nr. 1.0312)
DC06 (Wst.-Nr. 1.0873)
Available in the treatment states: LC, C290, C340, C390,C440, C490, C590, C690
Quality strip steel made from carbon steels in accordance with EN 10132-2 to 4/10140
C10E (Wst.-Nr. 1.1121)
C15E (Wst.-Nr. 1.1141)
16MnCr5 (Wst.-Nr. 1.7131)
C22E (Wst.-Nr. 1.1151)
C35E (Wst.-Nr. 1.1181)
C45E (Wst.-Nr. 1.1191)
C50E (Wst.-Nr. 1.1206)
C55E (Wst.-Nr. 1.1203)
C60E (Wst.-Nr. 1.1221)
C55S (Wst.-Nr. 1.1204)
C60S (Wst.-Nr. 1.1211)
C67S (Wst.-Nr. 1.1231)
C75S (Wst.-Nr. 1.1248)
Micro-alloyed fine-grained steels according to EN10268 / 10140
S260MC (Wst.-Nr. 1.0970)
S315MC (Wst.-Nr. 1.0972)
S340MC (Wst.-Nr. 1.0974)
S355MC (Wst.-Nr. 1.0976)
S380MC (Wst.-Nr. 1.0978)
S420MC (Wst.-Nr. 1.0980)
S460MC (Wst.-Nr. 1.0982)
S500MC (Wst.-Nr. 1.0984)
S550MC (Wst.-Nr. 1.0986)